Jet 80 | Booster | Jet drive | Jet propulsion
€845.00*
Content:
1 Piece
In stock, delivery time: 1-5 labor days**
Product number:
1725-B
Shipping weight/volume:
3 kg
Available stock:
25
Product information "Jet 80 | Booster | Jet drive | Jet propulsion"
Surf fun without ocean and waves
This jet drive is the perfect companion for your surfboard, paddleboat, kayak, canoe... The Jet 80 supplies extrem high maneuverability.
The advantages of the Jet 80 at a glance:
- Nozzle, impeller, stator made of high-strength aluminum 7075
- All parts black anodized for extra protection against corrosion
- Flow optimized tunnel made of metal
- Triple bearing and shaft seal (Simmerring)
- Direct lubrication via grease nipple
- Salt water resistant
That fits:
- Surfboard | Paddleboad | Kayak | Canoe
- Scorpion 7455
- Gasoline engines with 13-20PS
Good to know:
- The jet must be greased before usage
- Please flush after usage in salt water with fresh water
- For further questions please contact us
| Length: | 320mm (12,6") |
|---|---|
| Height: | 121mm (4,76") |
| Width: | 130mm (5,12") |
| Weight: | 1995g |
| Shaft: | 12mm (0,47") |
| Impeller: | 80mm (3,15") | Aluminium 7075 |
| Static thrust: | Bis 500N |
| Required rpm: | 12.000 - 14.000 |
| Min. required power: | 7,5KW Current |
| Material: | Aluminium 7075 | Tunel Metal |
| Cooling water nipple: | M6 |
Download Manual
Jet 80 | Booster | Jet drive
Product safety information:
Manufacturer:
MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
That fits
%
Scorpion HK 7455-330KV | Bundle Box | 22,4KW | Water cooled | Outrunner
Bundle box for fast and easy assemblyScorpion 7455-330KV motor comes as a set including required motor mount made of aluminium 7075. No long search and everything fits 100%.Thats included1x Motor Scorpion 7455-330 water cooled | 2137-W Screws 1x Motor mount made of aluminium 7075 | 2137-M
Good to know This motor requires a programmable ESC such as the MGM 40063-3 ESC or a different ESC with exact same technical datas.
The advantages at a glance Outrunner motor with higher efficiency (compared to inrunner motors with similar performance) Efficient and direct water cooling Both sided motor shaft for high stability and less vibration 20 Neodym magnet poles | 100% identic 2 Turn delta winding Large ball bearings for high stability and long service life 4 screws M5 included to delivery
That fits Monoboat > 2m | 1 Motor | 2 Drives | Gear box | 12-14S | 2-3 Blade Propeller | Pitch 1.4 - 1,6 | Diameter 70-75mm Catamaran > 2m | 2 Motors | 12-14 S | 3-4 Blade Propeller | Pitch 1.4 - 1.6 | 75-80mm Surfboards or other watercraftsSuitable ESC MGM 40063-3 or similairFor further questions please contact us
€998.00*
instead of
€1,025.00*
single purchase price (2.63% saved)
Cable Set | MGM USBCOM5 | Universal
Easy configuration of your MGM ESC at your PCThe MGM Compro USB - interface allows easy configuration and backup of your ESC datas, regarding to your used motor, at your pc. The required CD Rom is incuded to every MGM ESC delivery.The advantages at a glance:Easy configuration and backup of your ESC datasProgrammable parameter: Timing | Pole Amount | Break | Start up| frequency | cutoff voltage | motor temperature| batterie temperatur | maximum rotational speed Thats included:Connection cable USB COM cable
€61.00*
Grease pump | Vacuum pump
To make sure everything runs wellTo make sure your drive is ready to go anytime it requires frequent greasing. The advantages at a glanceFor grease with medium consistency and high viscosity oilMade of steel, galvanizedWith universal mouthpiece and conical grease nipple DIN 71412 How its done Open the greas pump and remove the inner cap and chainFill in flex shaft greaseNow put the inner cap and chain back in and press down as far as possibleFor greasing remoce the red capPlace the opening of the pump on top of the greasing nipplePump perpendicular until you fill resistance.
€15.50*
Stator | Jet 80 | 80mm (3,15")
Because sometimes things dont go according to planToo close to the shore and your Jet picked up stones or similar and damaged the impeller? No reason to worry. You find a replacement stator, made of aluminium 7075, for your Jet 80 here.Your Jet is back on the water within 6 steps Unscrew the screws on the side of the nozzle Take the complete nozzle off the jet Loosen the grub screws on the side that hold the stator in the nozzle Swap the stator Fix this with the grub screws Reassemble the nozzle with stator onto the jet
€179.00*
Impeller | Jet 80 | 80mm (3,15")
Because sometimes things dont go according to planToo close to the shore and your Jet picked up stones or similar and damaged the impeller? No reason to worry. You find a replacement impeller, made of aluminium 7075, for your Jet 80 here.Your Jet is back on the water within 8 stepsLoosen the jet clutch grub screwUnscrew the jet's cooling water nipple Remove the 3 - M4 grub screws on the nozzle of the jet Now remove the rear nozzle Now you need a strong rope or something similar. Put this around the impeller and pull it out of the jet body with the shaft Now carefully heat the 2 grub screws on the impeller and remove them Detach the impeller from the shaft and replace it - don't forget to secure the grub screws of the new impeller with Loctite as well Now assemble the jet in reverse order and you are ready to go
€179.00*