Impeller | Jet 58 | 58mm (2,28")
€128.00*
Content:
1 Piece
In stock, delivery time: 1-5 labor days**
Product number:
1723-58-I
Shipping weight/volume:
0.3 kg
Available stock:
8
Product information "Impeller | Jet 58 | 58mm (2,28")"
Because sometimes things dont go according to plan
Too close to the shore and your Jet picked up stones or similar and damaged the impeller? No reason to worry. You find a replacement impeller, made of aluminium 7075, for your Jet 58 here.
Your Jet is back on the water within 8 steps
- Loosen the jet clutch grub screw
- Unscrew the jet's cooling water nipple
- Remove the 3 - M4 grub screws on the nozzle of the jet
- Now remove the rear nozzle
- Now you need a strong rope or something similar. Put this around the impeller and pull it out of the jet body with the shaft
- Now carefully heat the 2 grub screws on the impeller and remove them
- Detach the impeller from the shaft and replace it - don't forget to secure the grub screws of the new impeller with Loctite as well
- Now assemble the jet in reverse order and you are ready to go
| Diameter: | 58mm (2,28") |
|---|---|
| Weight: | 30g |
| Material: | Aluminium 7075 |
Impeller | Jet 58 | 58mm (2,28")
Product safety information:
Manufacturer:
MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
That fits
Jet 58 | Steerable | Jet drive | Jet propulsion
Jet driveThis jet drive is the perfect companion for your model boat with a vertical stern (90°) and a length of at least 1.30 m as well as your waveboard, hydrofoil, kitesurf or surfboard.The Jet 58 supplies extrem high maneuverability. The advantages of the Jet 58 at a glance: Nozzle, impeller, stator made of high-strength aluminum 7075 All parts black anodized for extra protection against corrosion Flow optimized tunnel made of metalSteering Left | RightTriple bearing and shaft seal (Simmerring) Direct lubrication via grease nippleSalt water resistantAdjustable angle Left | right +/- 15° | Up | Down +/- 10° That fits:Boats with a 90° stern and at least 1.30m in length Waveboard, Hydrofoil, Kitesurf or SurfboardInternal and external rotor motors 50 series Gas engines with 26-40ccm Good to know:The jet must be greased before usageFlush wih fresh water after usage in salt waterFor further questions please contact us
€549.00*
%
Jet 58 | Booster | Bundle Box | Jet drive | Jet propulsion
Jet driveThis jet drive is the perfect companion for your waveboard, hydrofoil, kitesurf or surfboard. The Jet 58 supplies extrem high maneuverability. The bundle box supplies fitting parts for reduced price to you. The bundle box supplies fitting parts for reduced price to you. The advantages of the bundle box at a glance: All parts fit for each otherReduced priceNozzle, impeller, stator made of high-strength aluminum 7075 All parts black anodized for extra protection against corrosion Flow optimized tunnel made of metalTriple bearing and shaft seal (Simmerring) Direct lubrication via grease nippleSalt water resistantThats included:Jet 58 Booster | 1723-58-BMHZ-Scorpion Motor 5035 | 2136-WMotor mount 5035 | 2136-MCoupling 9-10mm | 1721.Good to know:The jet must be greased before usageFlush with fresh water after usage in salt waterFor further questions please contact us
€760.00*
instead of
€969.90*
single purchase price (21.64% saved)
%
Jet 58 | Lenkbar | Bundle Box | Jet drive | Jet propulsion
Jet driveThis jet drive is the perfect companion for your waveboard, hydrofoil, kitesurf or surfboard. The Jet 58 supplies extrem high maneuverability. The bundle box supplies fitting parts for reduced price to you. The bundle box supplies fitting parts with reduced price toyou. The advantages of the bundle box at a glance: All parts fit for each otherReduced priceNozzle, impeller, stator made of high-strength aluminum 7075 All parts black anodized for extra protection against corrosion Flow optimized tunnel made of metalTriple bearing and shaft seal (Simmerring) Direct lubrication via grease nippleSalt water resistantThats included:Jet 58 Steerable | 1723-58MHZ-Scorpion Motor 5035 | 2136-WMotor mount 5035 | 2136-MCoupling 9-10mm | 1721.Good to know:The jet must be greased before usageFlush with fresh water after usage in salt waterFor further questions please contact us
€780.00*
instead of
€989.90*
single purchase price (21.2% saved)
Jet 58 | Booster | Jet drive | Jet propulsion
Jet driveThis jet drive is the perfect companion for your waveboard, hydrofoil, kitesurf or surfboard. The Jet 58 supplies extrem high maneuverability. The advantages of the Jet 58 at a glance:Nozzle, impeller, stator made of high-strength aluminum 7075 All parts black anodized for extra protection against corrosion Flow optimized tunnel made of metalTriple bearing and shaft seal (Simmerring) Direct lubrication via grease nippleSalt water resistant That fits:Waveboard, Hydrofoil, Kitesurf or SurfboardInternal and external rotor motors 50 series Gasoline engines with 5-8PSGood to know:The jet must be greased before usageFlush with fresh water after usage in salt waterFor further questions please contact us
€529.00*
Stator | Jet 58 | 58mm (2,28")
Because sometimes things dont go according to planToo close to the shore and your Jet picked up stones or similar and damaged the impeller? No reason to worry. You find a replacement stator, made of aluminium 7075, for your Jet 58 here.Your Jet is back on the water within 6 steps Unscrew the screws on the side of the nozzle Take the complete nozzle off the jet Loosen the grub screws on the side that hold the stator in the nozzle Swap the stator Fix this with the grub screws Reassemble the nozzle with stator onto the jet
€128.00*