Jet 58 | Lenkbar | Bundle Box | Jet drive | Jet propulsion
€880.00*
% instead of €979.00* single purchase price (10.11% saved)
Content:
1 Set
In stock, delivery time: 1-5 labor days**
Product number:
1723-58-BB
Shipping weight/volume:
4 kg
Available stock:
8
Product information "Jet 58 | Lenkbar | Bundle Box | Jet drive | Jet propulsion"
Jet drive
This jet drive is the perfect companion for your waveboard, hydrofoil, kitesurf or surfboard. The Jet 58 supplies extrem high maneuverability. The bundle box supplies fitting parts for reduced price to you. The bundle box supplies fitting parts with reduced price toyou.
The advantages of the bundle box at a glance:
- All parts fit for each other
- Reduced price
- Nozzle, impeller, stator made of high-strength aluminum 7075
- All parts black anodized for extra protection against corrosion
- Flow optimized tunnel made of metal
- Triple bearing and shaft seal (Simmerring)
- Direct lubrication via grease nipple
- Salt water resistant
Thats included:
- Jet 58 Steerable | 1723-58
- MHZ-Scorpion Motor 5035 | 2136-W
- Motor mount 5035 | 2136-M
- Coupling 9-10mm | 1721.
Good to know:
- The jet must be greased before usage
- Flush with fresh water after usage in salt water
- For further questions please contact us
Datas Jet
| Length: | 218mm (8,58") |
|---|---|
| Height: | 89mm (3,5") |
| Width: | 88mm (3,46") |
| Weight: | 760g |
| Shaft: | 9mm (0,35") |
| Impeller: | 58mm | Aluminium 7075 (2,28") |
| Static thrust: | 120 - 330N (12-24,47Kg) |
| Rpm: | 20.500 - 23.500 |
| Min. required power: | 4.5 - 6 KW Current |
| Material: | Aluminium 7075 | Tunnel Metal |
Datas Motor
| Motor Diameter: | 61mm (2,4") |
|---|---|
| Stator Diameter: | 50mm (1,96") |
| Stator Length: | 35mm (1,37") |
| Magnet Poles: | 8 |
| Motor KV: | 760KV (rpm/V) |
| Max. current: | 7400W |
| Weight: | 729g |
| Diameter motor shaft: | 10mm (0,4") |
| Body length: | 75mm (2,91") |
| Motor Timing: | 5-7.5° |
| Attachment circle: | 40mm (1,26") (4xM4) |
| Max. Lipo: | 6 - 10 |
Download Manual
Jet 58 | Lenkbar | Bundle Box | Jet drive
Product safety information:
Manufacturer:
MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
That fits
Hand control | Radio control | E-surf | Waterproof
Everything under controlWith our hand control, safe and uncomplicated maneuvering of your water sports equipment is guaranteed. Since this is waterproof, "bathing" will not be a problem in the future. The cuff included in the delivery works like a kind of swimming ring, so that the remote control floats on the water surface and can be easily picked up again.The advantages at a glance:Easy to use colt control
LCD screenDisplay of power currently being used | Residual power (when the receiver is connected to the battery)Cruise controlThats included:Hand control Recipient
Y-cable (For connection of controller, receiver and voltage converter) Voltage converter USB cable
charging pad Circuit diagram CuffInstallation of the controller: 1. Connect the input cable of the BEC parallel with the controller (red to red / black to black) 2. Connect triple plug of the BEC to one of the sockets of the Y-cable (the red/black flat plug cable of the BEC is for programming only and therefore not required) 3. Connect the second jack of the Y-cable to the controller 4. Connect the plug of the Y-cable to the jack of the receiver 5. Secure the receiver protected in your water sports equipment. An antenna output to the surface is not requiredUsage of controller: 1. Start the transmitter by pressing the button on the left side 3 seconds 2. Connect battery to ESC 3. You can hear a short beep followed by 3 more beeps now 4. Pull gas until you hear 3 tones with increasing sound 5. The controller is ready to use now Charging the hand control: 1. Connect the charging pad using the suuplied USB cable and your PC 2. Place the hand control at the center of the charging pad 3. The display lights up and shows current state of charging level nowFor further questions please contact us
€180.00*
Grease pump | Vacuum pump
To make sure everything runs wellTo make sure your drive is ready to go anytime it requires frequent greasing. The advantages at a glanceFor grease with medium consistency and high viscosity oilMade of steel, galvanizedWith universal mouthpiece and conical grease nipple DIN 71412 How its done Open the greas pump and remove the inner cap and chainFill in flex shaft greaseNow put the inner cap and chain back in and press down as far as possibleFor greasing remoce the red capPlace the opening of the pump on top of the greasing nipplePump perpendicular until you fill resistance.
€15.50*
Secure clips | Hose holder | 4pcs.
For a clean and safe assemblyWith the clip clamp you secure your silicone or other hoses and thus ensure a clean and clear structure.The advantages at a glanceBetter securing of the silicone hose on cooling water nipplesEasily mountable and dismountableFor a clean and safe assembly
€3.60*
Silicon hose | 4mm (0,16") | 1 Meter (39,37")
Quality from GermanyHigh quality silicone tubing for a reliable setupThe advantages at a glanceVery good resistance to alkalis, diluted acids, cleaning agents, etc.Weather and aging resistant, ozone resistant, steam sterilizable and physiologically harmlessOperating temperature ranges from -60° to +200° CBfR XV. and FDA § 177.2600 compliantDimensional tolerances according to the DIN ISO 3302-1 standardSuitable for methanol fuels or cooling water.
€4.90*