Jet 52 | Steerable | Jet drive | Jet propulsion
€399.00*
Content:
1 Piece
In stock, delivery time: 1-5 labor days**
Product number:
1723-N
Shipping weight/volume:
1.5 kg
Available stock:
26
Product information "Jet 52 | Steerable | Jet drive | Jet propulsion"
Perfect for rioting
This jet drive is the perfect companion for your model boat with a vertical stern (90°) and a length of at least 1.20 m or your body board.
The Jet 52 supplies extrem high maneuverability.
The advantages of the Jet 52 at a glance:
- Nozzle, impeller, stator made of high-strength aluminum 7075
- All parts black anodized for extra protection against corrosion
- Flow optimized tunnel made of metal
- Vector control (horizontal | vertical)
- Triple bearing and shaft seal (Simmerring)
- Direct lubrication via grease nipple
- Salt water resistant
- Adjustable angle Left | right +/- 15° | Up | Down +/- 10°
That fits:
- Boats with a 90° stern and at least 1.20m in length
- Body boards | Short impulse drive for stand up paddling boards
- Internal and external rotor motors 40-50 series
- Gas engines with 26-32ccm
Good to know:
- The jet must be greased before usage
- Flush with fresh water after usage in salt water
- If 2 Jets are used, we recommend a minium distance of 80mm between both Jets
| Length: | 220mm (8,66") |
|---|---|
| Height: | 80mm (3,15") |
| Width: | 82mm (3,23") |
| Weight: | 760g |
| Shaft: | 8mm (0,31") |
| Impeller: | 52mm (2,05") | Aluminium 7075 |
| Static thrust: | 120 - 240N (12 - 24,47Kg) |
| RPM: | 23.500 - 26.500 |
| At least required power: | 2,5 KW Dauerleistung |
| Material: | Aluminium 7075 | Tunnel Steel |
Jet 52 | Steerable | Jet drive
Product safety information:
Manufacturer:
MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
That fits
Scorpion HK-5035-760KV | 7,4KW | Water cooled | Outrunner
Exclusive special series of the popular Scorpion enginesThis series of water-cooled external rotor motors, manufactured exclusively for us, was developed in close cooperation with Scorpion Motors.The advantages at a glanceOutrunner motor with high efficiencyDirect water cooling inside motor - cooling water nipples are connected to motor directly through the opposite millings for water nipplesThe third milling has to be closed with a set screwLarge ball bearings for high stability and long service life3 x cooling nipple M4 included to deliveryRotation of motor can be changed by exchange of phases or usage of suitable ESC That fits 300A regulators and 6-10S Propeller at 6S | 55-57mm | pitch 1.4 | 2 blade Propeller at 6S | 54-56mm | pitch 1.4 | 3 blade Propeller at 8S | 54-63mm | pith 1.4 | 2 blade Propeller at 8S | 53-62mm | pith 1.4 | 3 blade Propeller at 10S | 54-65mm | pitch 1.4 | 2 bladePropeller at 10S | 53-64mm | pitch 1.4 | 3 bladeFor further questions please contact us
€359.00*
Silicon hose | 4mm (0,16") | 1 Meter (39,37")
Quality from GermanyHigh quality silicone tubing for a reliable setupThe advantages at a glanceVery good resistance to alkalis, diluted acids, cleaning agents, etc.Weather and aging resistant, ozone resistant, steam sterilizable and physiologically harmlessOperating temperature ranges from -60° to +200° CBfR XV. and FDA § 177.2600 compliantDimensional tolerances according to the DIN ISO 3302-1 standardSuitable for methanol fuels or cooling water.
€4.90*
Secure clips | Hose holder | 4pcs.
For a clean and safe assemblyWith the clip clamp you secure your silicone or other hoses and thus ensure a clean and clear structure.The advantages at a glanceBetter securing of the silicone hose on cooling water nipplesEasily mountable and dismountableFor a clean and safe assembly
€3.60*