MHZ - Scorpion HK-7455-320KV | 22,4kW | For Jet 64 + Jet 80
Prices incl. VAT plus shipping costs
Ready to ship today,
Delivery time appr. 1-3 workdays **
Anytime surf fun regardless of ocean and waves? – with the right surfboard motor only!
While developing the Jet 64, we shortly noticed, that available electro motors sticked to their advertised performance specifications, in rare cases. Why is that? Most of the time fictional datas are used (max. (Ampere) A x max. (Volt) V = (power)W) The fact that this datas can be achieved for seconds only and often lead to destruction of motor, is not mentioned most of the time. This causes immediate disillusionment at first driving tests with load.
What is so different about the MHZ – Scorpion 7455-320 KV Motor?
MHZ means highest quality for highest demands. For that reason their is one choice only - Scorpion Motors. Together we developed a motor, which was made for the Jet 64 needs and surfboard setup esspecially. Our performance specifications refer to continous power with 56V voltage. Frustration caused by low motor performance? – impossible!
Features of the MHZ – Scorpion 7455-320 KV Motor:
For production, twenty 100% similair Neodym magnets as well as 2 Turn Delta winding is used. This causes higher efficiency of the motor. The maintenance–free MHZ – Scorpion motor has a integrated water cooling – which is much more efficiently than an air cooled or cooled by motor mount version motor. Furthermore the MHZ – Scorpion 7455-320 is not supported "pendant" with one–sided motor shaft but with our dual–sided motor shaft for smooth, free of interference operation. Further every motor is tested before delivery.
For selection of fitting batteries or any questions regarding electro surfing, please contact us through the "Questions concerning this product" function in our shop anytime.
Good to know!
We highly recommend the usage of the MGM ESC 40063 ESC Art. 2502 since many other ESC are not suitable for 20 pole motors.
> Do you have any questions concerning this product?
|No load current:||9,1A|
|Max. pulse current:||400A|
|Shaft diameter:||12mm (0,47")|
|Length motor shaft front:||40mm (1,57")|
|Length motor shaft back:||14,5mm (0,57")|
|Total length:||106mm (4,17")|
|Diameter stator:||74mm (2,91")|
|Length stator:||55mm (2,17")|
|Motor Timing:||24° or more|
|Material:||high quality aluminium and steel|
|Magnet poles:||20 (100% identic neodym magnets)|
|Winding:||2 Turn Delta winding|
|Attachment:||6 x M5 screws|
|Bolt circle: ||45mm (1,77")|
Can the direction of rotation of the motor be changed?
The direction of rotation of the motor can be changed, for this 2 phases must be interchanged.
If an MGM controller is used, this is not necessary, then the change of the direction of rotation can also be programmed directly in the controller.
No minimum order quantity. Check shippment costs here.
We do accept payment by paypal and bank transfer. Credit card payment through paypal is also accepted.
Queries? Please contact us anytime by using our contact form.