E-Surf | Surfboard | Bundle Box
Prices incl. VAT plus shipping costs
Ready to ship today,
Delivery time appr. 1-3 workdays **
This article is sent as bulky good
Bundle box
Surfboard Bundle Box for quick and easy assembly of your DIY electric surfboard. The respective components are absolutely perfectly matched to each other. Also you take advanatge of the lowered price compared to single purchase price.
Thats included:
- 1x Surfboard 1722-6
- 1x Powertrain with MGM 40063 ESC 1722-5
- 1x Programming cable for MGM ESC 2501
- 1x Hand control 1722-FS
- 1x Grease gun 1918
- 1x Anti slip pad 1722-Top
That's how it's done
- Mount the powertrain which is included in the bundle box directly to the included surfboard. (We have already made the necessary cut-outs in the board for you.)
- For easy assembly, we also recommend the use of polymer adhesive. In this way you also seal your board by the way.
- Now connect the powertrain to the batteries you have chosen (tips on battery selection can be found in the "FAQ" section)
- Now connect the hand control - you can find a detailed plan for the connection here in the "Downloads" area
- Now program the ESC - instructions for this can be found in the "Downloads" area
- Grease the jet with the grease gun included in the set - you can find information about this in the "Downloads" area
- Attach the Anti Slip Pad to your board - it prevents you from slipping on the board while riding
> Do you have any questions concerning this product?
Board:
| Length: | 2103mm (82,8") |
| Width: | 640mm (25,2") |
| Max. Height: | 144mm (5,7") |
| Weight: approx. | 9,2KG |
| Material: | GFK - with extra reinforcement to the stress areas |
| Wall thickness: | 3mm (0,12") |
| Total volume: | 131 dm³ (131L) |
| Color: | Turquoise - High Gloss - Gelcoat |
| Material: | Service hatch way and inspection cover: Polycarbonate |
Powertrain:
| Length bottom plate: | 500mm (19,7") |
| Width bottom plate: | 140mm (5,5") |
| Height Powertrain: | 115mm (4,5") |
| Width Powertrain: | 140mm (5,5") |
| Material: | Aluminium 7075 |
| Color: | Anodized black |
| Max. connection voltage: | 14S |
| Weight: | Approx. 5100g |
ESC:
Max. peak current (5 Sek.): 500 A
Max. continuous current (for full throttle): 400 A
Operating voltage: 12 - 63 V
Weight without power conductors: 460g
Servocable cross-section: 0,25qmm
Length of the servocable: 190mm
Max RPMs: 250.000
Number of regulation steps: 2048
Motor PWM frequency: 8 - 32 kHz
On-state switch (FETs) resistance at 25 °C: 2 × 0.53 mW
Available BEC / OPTO versions: Opto
Motor:
| Current power: | 14kW |
| Peak output: | 22,4kW |
| Max. rotation: | 17500upm |
| Rotation: | 320KV |
| No load current: | 9,1A |
| Max. V: | 56V |
| Max. pulse current: | 400A |
| Continuous current: | 250A |
| Weight: | 2200g |
| Shaft diameter: | 12mm (0,47") |
| Length motor shaft front: | 40mm (1,57") |
| Length motor shaft back: | 14,5mm (0,57") |
| Total length: | 106mm (4,17") |
| Diameter: | 86mm (3,39") |
| Diameter stator: | 74mm (2,91") |
| Length stator: | 55mm (2,17") |
| Motor Timing: | 24° or more |
| Frequency: | 8 kHz |
| Material: | high quality aluminium and steel |
| Magnet poles: | 20 (100% identic neodym magnets) |
| Winding: | 2 Turn Delta winding |
| Attachment: | 6 x M5 screws |
| Bolt circle: | 45mm (1,77") |
| Torque: | 5,2Nm |
Hand control:
| Steering: | |
| Material: | ABS plastic black |
| Sensor Type: | Hall sensor |
| Size: | 152 x 24mm |
| Display: | 25,6 x 16,6mm |
| Display shows: | control mode, remote batt. voltage, receiver detection voltage, signal strength, PWM signal % |
| Full charge working time: | More than 2 hours |
| Transmission distance: | Air: 10m, Water: 1m |
| Receiver: | |
| Power supply: | 5V |
| Throttle signal output: | 1-2ms 50Hz PWM 5V max. |
| Voltage range: | 5-75V +/- 5% |
Where to find fitting batteries?
2 x = 14S or 4x for longer driving time (parallel 2x2)
or
total 14S
Payment
We do accept payment by paypal and bank transfer. Credit card payment through paypal is also accepted.
Contact
Queries? Please contact us anytime by using our contact form.