DIY | MHZ WATERCRAFT | SURFBOARD | E–surfboard
Prices incl. VAT plus shipping costs
Ready to ship today,
Delivery time appr. 1-3 workdays **
This article is sent as bulky good
If A holds so does B(oard)!
In the past months, your emails and inquiries reached us daily. Where can I get a suitable surfboard for your jet? How can I be sure that this will also fit your hardware? How can I avoid expensive purchases? Why cant I just transform my normal surfboard? Together with professional surfers we have therefore developed the appropriate DIY surfboard to make construction much easier. .
The devil is in the detail!
Quickly we realized that a powerful jet and engine is not the solution to the entire problem. The driving characteristics are a significant part of the hydrodynamics of the board and a perfectly coordinated setup. The MHZ Watercraft Surfboard is therefore specially developed for use with our Powertrain. A precise recess for this is located on the underwater area of the surfboard. The generous service hatchway (90 x 20 cm) ensures optimal accessibility during the construction and later serves for maintenance of the jet. The round inspection cover ensures the uncomplicated charging of your batteries. The large service hatchway does not have to be opened for this purpose.
Therefore, we designed our DIY E-surfboard without a fin but with perfect handling characteristics, so you can easily master curves without any fin.
A further detail is the ventilating valve included to the delivery for the large service hatchway, which serves for pressure equalization. To protect the nozzle of your jet from damage, our surfboard has a rear cover. This can also be omitted if required. It is no longer necessary to foam the board for more stability and buoyancy as the board is factory-coated with hard foam at the inside.
What is included?
- GFK DIY surf board with extra reinforcement of the stress areas
- Rear cover to protect your jet
- Cover for service hatchway made of 6mm polycarbonat
- Ocean going inspection hatch made of polycarbonat
- Venting valve
- Sealing strip
> Do you have any questions concerning this product?
|Max. Height:||144mm (5,7") |
|Material:||GFK - with extra reinforcement to the stress areas|
|Wall thickness:||3mm (0,12")|
|Total volume:||131 dm³ (131L)|
|Color:||Yellow - High Gloss - Gelcoat|
|Material:||Service hatch way and inspection cover: Polycarbonate|
What final weight do I have to expect after construction is done?
The board weighs approx. 30kg including our powertrain and batteries.
How fast is this board with your powertrain?
By usage of this board and our powertrain, speed of 45-50 Km/h is no problem (measured with 90Kg driver)
Where to find fitting batteries?
2 x = 14S
Ordered and payed until 10am (European time) sent same-day. No minimum order quantity. Check shippment costs here.
We do accept payment by paypal and bank transfer. Credit card payment through paypal is also accepted.
Queries? Please contact us anytime by using our contact form.